注冊 | 登錄讀書好,好讀書,讀好書!
讀書網-DuShu.com
當前位置: 首頁出版圖書科學技術工業技術機械、儀表工業工程制圖基礎(雙語教學版)

工程制圖基礎(雙語教學版)

工程制圖基礎(雙語教學版)

定 價:¥23.00

作 者: 張慶偉 等編
出版社: 重慶大學出版社
叢編項:
標 簽: 工程制圖

ISBN: 9787562435464 出版時間: 2005-10-01 包裝: 膠版紙
開本: 大16開 頁數: 206 字數:  

內容簡介

  本教材是作者多年教學經驗的基礎上,總結和吸取了多年來教學實踐的成果編寫而成的,教材內容符合工科制圖課程教學的工程圖基礎課程教學基本要求。將投影理論與最新國家標準、計算機繪圖軟件和教學光盤融為一體,可進行現代化的多種媒體教學。本教材內容包括:制圖基本知識、正投影基礎、投影變換、立體的投影、平面、直線、立體與立體相交、組合體、軸測圖、圖樣畫法、螺紋與螺紡緊固件、零件圖、裝配圖、電工制圖基礎和計算機繪圖等。本教材與《工程制圖基礎習題集》配套使用,可作為高職高專類專科學校機械類、非機械類各專業的教材,也可供其他各類學校有關師生和相關工程技術人員參考。

作者簡介

暫缺《工程制圖基礎(雙語教學版)》作者簡介

圖書目錄

Chapter 1 Basic Skills of Engineering Drawing(工程制圖基本技能)
1.1 Drawing Instruments
1.2 Provisions of Chinese National Standard of Technology Drawing
1.3 Geometric Constructions
Chapter 2 Points, Lines and Planes(點、線、面的投影)
2.1 The Basic Theory of Projection
2.2 Principal Projection Planes
2.3 Projections of a Point
2.4 Views of a Line
2.5 Views of a Plane
Chapter 3 Projections of an Object(基本立體的投影)
3.1 Projections of a Polyhedron
3.2 Projections of a Revolution
Chapter 4 Surface Intersections (表面交線)
4.1 Introduction
4.2 Intersections of Planes and Polyhedrons
4.3 Intersections of Planes and Revolutions
4.4 Intersections Between Two Revolutions
Chapter 5 Three Views and Dimensions of a Composite Object(組合體的三面投影和尺寸)
5.1 Three Views of an Object
5.2 Drawing of Three Views of a Composite Object
5.3 Dimensioning
5.4 Reading Views
Chapter 6 Views (視圖)
6.1 Introduction
6.2 Principal Views
6.3 The Named Views
6.4 Partial Views
6.5 Auxiliary Views
Chapter 7 Sectional Views (剖視圖)
7.1 Sectional Views
7.2 Types of Cutting Planes
7.3 Cross-sections
7.4 Conventional Practices
7.5 Comprehensive Example
Chapter 8 Threads and Thread Fasteners(螺紋和螺紋緊固件)
8.1 Thread
8.2 Thread Fasteners and Stipulated Drawing of Thread Joinings
Chapter 9 Detail Drawing(零件圖)
9.1 Usage and Contents
9.2 Select Views for a Detail Drawing
9.3 Drawing Analyzing of Typical Parts
9.4 Reading Detail Drawings
Chapter 10 Introduction to an Assembly Drawing(裝配圖簡介)
10.1 Contents
10.2 Representation Methods of Assembly Drawings
10.3 Dimensions in an Assembly Drawing
10.4 Part Numbers and Part Lists
Appendix(附錄)
Glossary(中英專業詞匯對照表)

本目錄推薦

掃描二維碼
Copyright ? 讀書網 ranfinancial.com 2005-2020, All Rights Reserved.
鄂ICP備15019699號 鄂公網安備 42010302001612號